1、Frame: welded by steel plate into a frame structure, with good rigidity, two cylinders are fixed on the left and right columns, the table surface is provided with an auxiliary tool holder, easy to adjust the lower tool holder, the table surface is equipped with a feeding ball, easy to operate。。

2、Pressure device: composed of several pressure oil cylinders installed on the support plate in front of the frame. After the pressure oil cylinder enters, the pressure head overcomes the spring tension and presses the plate tightly. After the shearing is completed, it is reset with the help of the tension of the spring。

3、Front and rear stopper: Place the front stopper on the workbench and use a ruler to indicate the value to adjust the movable stopper to reach the required stopper value. When cutting thin plates, use the front stopper for convenience; The rear stopper is installed on the upper tool holder and swings up and down with the upper tool holder. The adjustment of the rear stopper is driven by a motor, and after gear reduction, it is driven by a screw, which can be manually adjusted。

4、Hydraulic system: composed of control valve group, oil pump, oil cylinder, return cylinder, press cylinder, and combined oil circuit. The whole system has reasonable structure, low noise, smooth operation and good safety performance。

5、Electrical part: By the control electrical cabinet, intermediate connection line, control panel and main, auxiliary motor, foot switch and other devices, high safety factor, excellent overall performance。